Air Discharger
1/2" DG200
Detail
Air Discharger
1/2" DG200
Detail

Automatic air vent in the sanitary equipment, heating and hot water systems, installation of solar power installations in the forced or natural circulation of air in the closed circuit is a device that ensures thrown out.Devices are widely used all over the world. particularly heating installations air of concentration as expressions which heating installations top spot in the air collecting pipe instead almıştır.özellikle in cold regions in the attic with the air of collection pipes and the installation labor, insulation, and freezing problem completely been eliminated.Devices in the fluid circulation equipment to the highest point of the line (possibly a collection of air) are mounted. Device closure and opening within the float valve spring and therefore consists of a latch. Buoy, installation, depending on the buoyancy of the fluid down and up motion in accordance with her mandate to move the valve closing and opening or closing of the channel open allows air subabını. Although a very simple system is a very sensitive device.Usually consist of three main parts. Top cover, connected to the body and the body's systems are used in the search phrases that are part of the safety valve is also spring-loaded check valve is part of the work. Installation of the system is working as a float device to be mounted vertically in the valve cover and the device is left a little loose. In this way, the installation will occur automatically as the air is thrown out. If the valve is not closed automatically when the air can not kick.

 

Gövde

:

Prinç-CuZn40Pb2

 

Body

:

P-CuZn40Pb2

 

Çalışma Sıcaklığı

:

max 110 o C

 

Working Temperature

:

max 110 o C

 

Çalışma Basıncı

:

max 10 Bar

 

Working Pressure

:

max 10 Bar

 

Çalışma Basıncı

:

min 0.80 MSS

 

Working Pressure

:

min 0.80 MSS

 

Ağırlığı

:

120 gr

 

Weight

:

120 gr

 

Bağlantı

:

G 1/2 "

 

Connection

:

G 1/2 "

 

Uygunluk

:

TSE

 

Appropriateness

:

TSE

 

  • DG 200 110 ° C Auto-Air Dischargers with heating and hot water units provide continuous and automatic air vent. Hot water heating installations, especially on the main distribution line instead of air cylinders and air evacuation device of the end points in the output column runs continuously and automatically.
  • 110 ° C until used in places where heat, chemicals, and is not affected by corrosion. Mount assembly to the point of attachment is mounted vertically with çekvana. Exhaust valves to ensure the automatic valve cover (one - two) rounds are released.
Technicial Specifications